DUBLIN, Jan. 15, 2024 /PRNewswire/ — The “Process Instrumentation & Control Methods” conference has been added to ResearchAndMarkets.com’s offering.
This course starts with an introduction of Process Measurements systems and basic Fluid Dynamics which is indispensable for the following subjects that are directly related to all types of Field Instrumentation as they are the base for reliable Process Control.
Principles and several methods of Process Control will be discussed comprehensively. Methods to determine the response of typical type of Processes are the base for correct controller tuning. Selection of the correct type control valve and optimal tuning method is critical for efficient and safe Process Control.
The Process industry often indicates that the fluid control valve is responsible for 60 to 70 percent of poor functioning control systems mainly as a result of poor selection which can be related to a lack of understanding of the principles of the valve operation and selection of the correct characteristic. The problems are not limited to the valve itself but are also associated to the combination of the valve actuator, signal converter and positioner.
This training program provides an insight into the applied types of valves and actuators and guidance to ensure the optimum valve selection and operation. As indicated earlier, the field Instruments should be reliable to obtain a reliable measurement input for the Process Controller and so the properties, advantages and disadvantages for Flow, Level, Pressure and Temperature instruments are an essential part of this course.
Applied Accuracy Terminology is also an important subject as required to make justifiable comparisons between the different types of measuring devices.
Who Should Attend:
This course is intended for all who are interested in or involved with Process Instrumentation and Control and like to obtain knowledge for a better understanding and so also to be able to operate and maintain process equipment competently and efficiently.
This course is not limited to those involved with it in their daily job like process technologists, instrumentation supervisors and technicians, control system engineers, process operators, electrical engineers and supervisors, but also to those involved in the design, implementation and maintenance of industrial control systems.
Learning Objectives
- Understand and discuss the several measurement principles of Process Measuring Instruments
- Be able to relate Fluid Dynamics properties to the types of applied measuring methods
- Gain basic knowledge of Process Control and specific Control Loop behavior
- Use the correct Control and Accuracy terminology during discussions
- Explain the different controller parameters
- Have a clear understanding of the three mode control actions, Proportional, Integral and Derivative action
- Apply methods to determine process reaction for the applied different tuning methods
- Understand the limitations of each tuning method
- Explain and discuss the reasons for application of combined Control methods like Feedback and Feed-forward control
- Discuss the ultimate function of a Control Valve in a Process Control Loop
- Appreciate the basic theory of flow through a Control Valve and select the correct control characteristic
- Recognize the different pressures and losses in a fluid flow system
- Understand the principles of Cavitation, Flashing and Choked flow
Agenda:
Programme Schedule (Day 1-4)
08:10 Registration & Tea
08:30 Morning Session Begins
10:20-10:40 Refreshments & Networking
12:30 Lunch
13:40 Afternoon Session Begins
15:00-15:20 Refreshments & Networking
16:30 Finish of Day/Course
Speakers:
Dick Horst
Professional Trainer and Consultant
National Training Institute of Oman
- 36 years’ of Professional Experience
- Instrument trainer at the National Training Institute of Oman
- Competence Assessor and Internal Verifier – City & Guilds for LNG Maintenance Department
- Process Analyser Engineer/Supervisor for maintenance of analyser systems at Nigeria LNG (6 Trains). Successfully set up a smoothly running maintenance team for the daily maintenance and troubleshooting of wide range of LNG analyser systems making use of a self-developed performance.
- Process Analyzer Engineer/Trainer and Consultant during pre-stage and startup of Sakhalin LNG, Russia
- Focal point Analyser Systems for the SMDS rebuilt project in Malaysia
- Process Analyzer Consultant for Shell Global Solutions during commissioning and start-up of the Reliance Refinery in India
For more information about this conference visit https://www.researchandmarkets.com/r/hhjkgc
About ResearchAndMarkets.com
ResearchAndMarkets.com is the world’s leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends.
Media Contact:
Research and Markets
Laura Wood, Senior Manager
[email protected]
For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900
U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716
Logo: https://mma.prnewswire.com/media/539438/Research_and_Markets_Logo.jpg
SOURCE Research and Markets
