O3 Mining Intersects 119.1 g/t Au over 2.5 Metres at Malartic H, Marban Alliance

• 119.1 g/t Au over 2.5 metres in hole O3MA-24-652 at a vertical depth of 114.2 metres, including 297.0 g/t over 1.0 metre on Malartic H
• 80.6 g/t Au over 3.1 metres in hole O3MA-24-554A at a vertical depth of 33.6 metres, including 411.0 g/t over 0.6 metres on Malartic H
• 1.9 g/t Au over 40.6 metres in hole O3MA-24-647 at a vertical depth of 77.6 metres on Malartic H

O3 Mining’s President and Chief Executive Officer, Mr. José Vizquerra commented: “These high-grade intercepts from our 2024 infill drilling program at Malartic H represent the first set of assay results since our maiden mineral resource estimate in June 2023. Malartic H continues to show potential to grow both laterally and at depth and we remain hopeful that additional infill drilling could allow us to grow the deposit. These results continue to demonstrate the potential at Malartic H and the robustness of the Marban Alliance Project.”

The objective of the 2024 drilling campaign on the Malartic H deposit was the conversion to the indicated category of the inferred resource estimated in 2023 (see news release of O3 Mining dated June 20, 2023 and entitled “O3 Mining Delivers Maiden Mineral Resource Estimate for Malartic H“). This campaign totalled 121 drill holes of which assay results for 56 of them are reported today. We will continue reporting as new assay results become available.

Malartic H Deposit

The Malartic H deposit has a recognized strike length of 950 metres, 300 metres wide and down to a vertical depth of 500 metres. It is located within five kilometres of the proposed processing plant described in the pre-feasibility study published on Marban Alliance in 2022 and approximately one kilometre to the north of the Malartic Hygrade former mine, near the hinge of a regional Z-shaped fold. The mineralized system is partially open laterally and completely open at depth. Notably, the Malartic H deposit is positioned between the northwestern extensions of the Marbenite and Norbenite shears, which host most of the resources of the Marban Alliance Project. At Malartic H, the two shears are northwest-trending and dipping around 70 degrees to the northeast. The deposit is hosted by an alternance of mafic and ultramafic volcanic sequence of the Jacola formation. Similar to the Hygrade area, numerous intermediate to felsic dyke systems are injected in the volcanic sequence. The mineralization occurs as disseminated pyrite with local visible gold in quartz veins and veinlets and disseminated in the host rock. Zones are spatially correlated shears within mafic volcanic units or with the intermediate to felsic dykes. All zones are roughly subparallel.

Today’s news release also includes the last significant intercepts obtained from the fall 2023 drilling program at Norlartic Extension (see news release of O3 Mining dated February 22, 2024 and entitled “O3 Mining Intersects 9.6 g/t Au over 6.2 Metres at Norlartic Extension, Marban Alliance“). 

The dyke swarm hosting the gold mineralization at Norlartic Extension is geologically identical to the one hosting the Norlartic and Kierens mineralization. They correspond to mafic and intermediate fine-grained dykes, which have been successfully traced along a two-kilometre trend and serve as a marker to the mineralized corridor.

Figure 1: Photo of visible gold at 46.7 metres in hole O3MA-24-554A at Malartic H

Table 1: Drill Hole Intercepts. Only intercepts with metal factor above 5.0 (g/t Au x metres) are reported, cut-off 0.3 g/t Au and above 200 metres from surface. See Table 2 below for full technical parameters.

Table 1 (continued):  Drill Hole Intercepts. Only intercepts with metal factor above 5.0 (g/t Au x metres) are reported, cut-off 0.3 g/t Au and above 200 metres from surface. See Table 2 below for full technical parameters.

Figure 2: Marban Alliance Project Map 

Figure 3: Malartic H – Significant Intercepts Map

Figure 4: Norlartic Extension – Significant Intercepts Map

Table 2: Technical parameters of holes of the 2023-2024 campaign at Malartic H and Norlartic Extension that have received assay results

Qualified Person

The scientific and technical content of this news release has been prepared, reviewed, and approved by Mr. Louis Gariepy , P.Eng (OIQ #107538), VP Exploration of O3 Mining, who is a “qualified person” within the meaning of National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101“).

Quality Assurance/Quality Control

Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Half-core samples are shipped to Agat laboratory in Val-d’Or, Québec, and Mississauga, Ontario for assaying. The core is crushed to 75% passing -2 mm (10 mesh), a 250 g split of this material is pulverized to 85% passing 75 microns (200 mesh) and 50 g is analyzed by Fire Assay (FA) with an Atomic Absorption Spectrometry (AAS) finish. Samples assaying >10.0 g/t Au are re-analyzed with a gravimetric finish using a 50 g charge.

Commercial certified standard material and blanks are systematically inserted by O3 Mining’s geologists into the sample chain after every 18 core samples as part of the quality assurance and quality control (“QA/QC”) program. Third-party assays are submitted to other designated laboratories for 5% of mineralized samples. Drill program design, QA/QC, and interpretation of results are performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices.

About O3 Mining Inc.

O3 Mining Inc. is a gold explorer and mine developer on the road to produce from its highly prospective gold camps in Québec, Canada. O3 Mining benefits from the support and expertise of a team of industry leaders as it grows towards becoming a gold producer with several multi-million-ounce deposits in Québec.

O3 Mining is well-capitalized and owns a 100% interest in all its properties (107,000 hectares) in Québec. O3 Mining trades on the TSX Venture Exchange (TSXV: OIII) and OTC Markets (OTCQX: OIIIF). The Corporation is focused on delivering superior returns to its shareholders and long-term benefits to its stakeholders. Further information can be found on our website at https://o3mining.com.

Cautionary Note Regarding Forward-Looking Information

This news release contains “forward-looking information” within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections, and interpretations as at the date of this news release. Forward-looking statements including, but are not limited to, statements with respect to planned and ongoing drilling, the significance of drill results, the ability to continue drilling, the impact of drilling on the definition of any resource, the ability to incorporate new drilling in an updated technical report and resource modelling. Any statement that involves discussions with respect to predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as “expects”, or “does not expect”, “is expected”, “interpreted”, “management’s view”, “anticipates” or “does not anticipate”, “plans”, “budget”, “scheduled”, “forecasts”, “estimates”, “believes” or “intends” or variations of such words and phrases or stating that certain actions, events or results “may” or “could”, “would”, “might” or “will” be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. Except for statements of historical fact relating to the Corporation, certain information contained herein constitutes forward-looking statements Forward-looking information is based on estimates of management of the Corporation, at the time it was made, involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the companies to be materially different from any future results, performance or achievements expressed or implied by such forward-looking information. Such factors include, among others, risks relating to the drill results at Malartic H; the significance of drill results; the ability of drill results to accurately predict mineralization; the ability of any material to be mined in a matter that is economic. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, the parties cannot assure shareholders and prospective purchasers of securities that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither the Corporation nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. The Corporation believes that this forward-looking information is based on reasonable assumptions, but no assurance can be given that these expectations will prove to be correct and such forward-looking statements included in this press release should not be unduly relied upon. The Corporation does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law. These statements speak only as of the date of this news release.  

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.

SOURCE O3 Mining Inc.

Also from this source

Go to Source