Tesla is wasting a jaw-dropping amount of raw material and cash to make the Model 3.
According to internal documents viewed by Business Insider, the company expects that as much as 40% of the raw materials used to produce batteries and driving units manufactured at Tesla’s Nevada Gigafactory need to be scrapped or reworked by employees before they are sent to Tesla’s Fremont factory and assembled into Model 3s.
That is to say, for every 2,500 battery packs and driving units that leave the Gigafactory, an additional 1,000 pieces of “nonconforming material” is created. Half of that material will be reworked and put into other car parts. The other half becomes scrap.
Tesla has spent almost $150 million on scrap materials so far this year, according to internal estimates Business Insider has seen. That number does not include the overhead cost of creating that scrap (energy, man hours, etc). Tesla reported manufacturing 9,766 Model 3s in the first quarter of this year.
Advertisement
Tesla told Business Insider that $150 million is an overstatement and that the number is in millions, but not that high.
“As is expected with any new manufacturing process, we had high scrap rates earlier in the Model 3 ramp. This is something we planned for and is a normal part of a production ramp,” Tesla said in a statement to Business Insider.
“Indeed, we have always explained that Model 3 margins would increase after costs begin to fall from elevated scrap and other early ramp issues — and they have. Our scrap rate for batteries has decreased by almost 60% since January as we have improved our manufacturing processes. It’s also important to remember the reason we scrap parts: because we want to ensure that only the highest-quality parts are used to create the best vehicles for our customers. This is a part of the reason why Tesla’s customer satisfaction scores for Model 3 vehicle quality and condition are at an all-time high of 93%,” the company said in its statement.
Whether Tesla is improving its process or not, this kind of inefficiency is expensive, especially so early in the process, industry experts told Business Insider. Gigafactory manufactures the batteries and drive units (the electric motor, inverter, and gearbox) that go into Tesla’s new much vaunted, but also much troubled, Model 3 vehicle.
This is all a byproduct of the march to reach Tesla CEO Elon Musk’s manufacturing target of 5,000 Model 3 cars per week by July.
Advertisement
What it is not a part of is Tesla’s overarching goal of building eco-friendly cars, or Musk’s ambition to create the most efficient and technologically impressive auto manufacturing process the world has ever seen. The process has been frustrated by battery supply issues and bottlenecks, by over automation and recalcitrant robots — and it doesn’t seem like that’s over by any means.
“That seems like just an awful lot of money. As an investor, I’d ask is this a good use of my funds? And what kind of transparency is going on here?” Rebecca Lindland a Senior Director and Executive Analyst at Kelley Blue Book told Business Insider.
“When I’ve seen scrapage piles its a handful of units… front bumpers, door panels and maybe you’ll see a crate of 20 pieces… You can’t sustain a 20% rate of scrap and expect to make money,” Lindland continued.
Gigawhat?
In its first-quarter earnings report, Tesla told investors that it had “largely overcome the bottleneck” in its battery module line at the Gigafactory.
But internal documents viewed by Business Insider and an employee familiar with the matter, who asked to remain anonymous, tell a different story — one of incredible waste, hasty manufacturing, and continuous problems. “Production hell,” as Elon Musk himself has called it, is still a chaotic scramble of issues.
Advertisement
A specific example for you. In February, a misprogrammed robot that handles battery modules repeatedly punctured through the plastic housing (called a clamshell) and into some battery cells, the employee said. Instead of scrapping all of the modules, some were fixed with adhesive and put back on the manufacturing line, the employee said. According to internal documents Business Insider reviewed, this foible affected more than 1,000 pieces.
A Tesla spokesperson maintained that the incident impacted far fewer parts, and that none of the punctured parts were released back to the manufacturing process. However, Business Insider reviewed an internal log that showed the parts were put into hundreds of vehicles. We sent Tesla an identification number for one of the cars, and the company would neither confirm nor deny that the piece was in a finished vehicle. It simply said that if the piece was a safety concern it would not be used.
In mid-April, thousands of bandoliers (a part used to create battery modules) were manufactured with an adhesive that was mixed incorrectly, according to the employee. Images shared with Business Insider show these parts simply sitting on the Gigafactory floor.
Tesla denies the claim.
“To be clear, these pieces are neither connected nor energized — and, instead, are kept in a temperature-controlled room where they pose no safety threat. If these parts were built into a battery pack, energized and interconnected, only then would they be operational. That is not the case, however, and there are no safety concerns,” the company said.
Advertisement
The cost of scrap has become so dramatic that internally, Tesla documents sometimes quantify the amount of money wasted by comparing it to another eye-popping number — like the scrap cost’s equivalent measured in miles of $5 footlong Subway sandwiches (137.11 miles, in one case).
Two charts showing inverter scrap costs from the start of the year to the end of May were accompanied by a calculation of how many new Model 3 vehicles someone could buy with the money wasted — 103.42 Model 3s, to be exact.
A similar set of charts calculating scrap costs for rotors noted that the scrap cost could have purchased 4,878 hats for Elon Musk’s Boring Company, which are priced at $20 a piece.
Business Insider also reviewed dozens of pictures of scrap piled high inside the Gigafactory. Some of it is flammable material used to create lithium batteries. Our source told us that some of these batteries present a hazard as they’re connected. Tesla countered that this is patently false, that all nonconforming materials are kept in a temperature controlled room, and that they pose no safety threat.
What’s more, our source told us that a significant amount of scrap is stored at a warehouse on Gigafactory’s campus off of Ireland Drive. Tesla said that’s not the case, though, that the Ireland Drive facility houses only parts received from suppliers.
Gigawho?
During Tesla’s first-quarter earnings call, Musk said that some of the bottlenecks Tesla was experiencing were due to over automation. To fix that, he told investors, Tesla “temporarily reduced automation in these areas and introduced semi-automated or manual processes.”
Advertisement
Basically, he turned off some of the machines. That alone had industry analysts we spoke with raising an eyebrow. Machines, when useful, are supposed to provide services humans can’t, like consistent quality and torque, on top of lifting heavy objects. If they aren’t useful, though, turning them off shouldn’t matter.
Either way, the employee told Business Insider that the process for deciding what stays on and what goes off has been less than scientific at times. Some machines in the Gigafactory have been turned off simply because they added more time to the manufacturing process than Musk liked when he observed them working on the Gigafactory floor.
An example: In May, Gigafactory employees turned off the “criticality” of the “genealogy” on a specific component in the Tesla battery pack, according to an internal email viewed by Business Insider.
In layman’s terms, that means they bypassed putting a tracking system on that specific part (the bandolier) in that stage of the manufacturing process in order to speed things up.
It’s common practice for automakers to create a genealogy for every part in a car. That way, if something goes wrong, the part’s source manufacturer, production time, serial number, lot number, expiration date, and more can all be traced. It follows the part through its entire life in the manufacturing process before it gets to your car. This is especially important during recalls because it ensures that companies can locate potentially defected parts.
Advertisement
Now that’s no longer the case for at least one part in the Gigafactory-made batteries. Tesla said they are being tracked by lot number because laser etching the parts individually was causing them to be scrapped. The company did not provide Business Insider with the number of parts in a lot, or explain why laser etching the tubes was causing them to be scrapped. It said that while it would not get into internal procedures, any modifications it made to the genealogy were to make the process better.
According to Business Insider’s source, Gigafactory maintained its new policy and the parts were not returned.
“His [Musk’s] obsession with production speed — he might achieve it, but at what cost? Reaching 5,000 in June or July is going to be a small success if there’s further pain down the road,” said Mark Schirmer of Cox Automotive Inc.
Tesla has never turned an annual profit, a source of consternation for Musk who, though fairly intolerant of criticism, has acknowledged that Tesla “isn’t a real company” until it does.
In the first quarter, the company’s net cash used in operating activities increased by $328.6 million from the same period a year before. This was in part due to the Model 3 ramp up. Expense has not been spared, but what investors should ask themselves is — could it have been?
Advertisement
“If he’s going to be an auto manufacturer he has to be held to auto manufacturing standards,” Lindland said. “If Honda or GM had these kinds of scrappage rates or waste Wall Street wouldn’t stand for that… Nobody would be saying, ‘you’re just a hater.'”
If you have more information about manufacturing at Tesla, feel free to give me a shout at llopez@businessinsider.com.