Williams Advanced Engineering has developed a new type of lithium ion battery module that could make automotive battery packs up to 30% lighter and 37% more energy dense.
The new module, unveiled at the annual Cenex low-carbon vehicle event in Bedfordshire, could have wide-reaching benefits if the tech is licensed to EV manufacturers.
The innovation means a battery of the same weight as a conventional unit can deliver longer range without compromising power, or higher power without compromising range. A test battery using 16 modules has a storage capacity of 60kWh and produces peak power of 550kW for 20 seconds, with peak regeneration of 550kW for 10 seconds.
The Adaptive Multi-Chem module is in the development phase. Williams Advanced Engineering technical director Paul McNamara says: “We could be manufacturing in a small series of around 50 units in the next six to 12 months.”
The pack is intended initially for use in high-performance premium electric sports cars and the hope is that, as demand grows, the technology will trickle down into the mainstream. The modules could also see service in motorsport and aerospace, where endurance and power combined with low weight are priorities.
Lithium ion battery packs are usually made up of a single type of cell, each with the same chemistry, energy density and power output. Cells are arranged in modules and the modules are assembled into a complete pack.
The Williams design uses two different types of cell chemistry, arranged in two separate blocks within the module. Widely used Samsung 21700 30T cylindrical cells provide good energy density and more specialised high-performance pouch cells from A123 systems provide the high power.