Change in the car industry: Megafusion against the trend – why VW FiatChrysler and Renault does not have to fear

MARCO BERTORELLO and LOIC VENANCE / AFP FiatChrysler and Renault: Cooperations, not mega alliances are the way to the future The change in the automotive world is in full swing. A new race among manufacturers and newcomers has long since begun. However, in the emerging digital and environmentally conscious world, a successful brand no longer… Continue reading Change in the car industry: Megafusion against the trend – why VW FiatChrysler and Renault does not have to fear

Here’s how a Fiat Chrysler-Renault merger could spark some mega auto deals

2017 Chrysler Pacifica BraunAbility is on display at the 109th Annual Chicago Auto Show at McCormick Place in Chicago, Illinois on February 9, 2017.Raymond Boyd | Getty ImagesFiat Chrysler's (FCA) proposed 50/50 merger with Renault could pave the way for a long-awaited M&A (merger and acquisition) boom in the sector, analysts have told CNBC.
The tie-up looks to strengthen FCA's position in electric vehicle technologies but would also create the third largest global automaker by production, behind Volkswagen and Toyota.
It's been lauded by many analysts, including Philippe Houchois, autos equity research analyst at Jefferies, who published in a note that there is nothing to dislike in a proposed merger that offers scope for synergies and restructuring.
“(It's) hard to disagree with the logic (of the deal) and with net synergies. We are positive on both shares with proforma combination still at low end of sector,” Houchois said.
Gaetan Toulemonde, autos equity research analyst at Deutsche Bank, said in a note that it would allow both groups to share platforms and “capture economies of scale at a time when the industry needs to invest massively in CO2 reduction (and) autonomous driving.”
VIDEO3:0103:01Renault would boost Fiat Chrysler in electric vehiclesClosing BellThe auto industry has long promised consolidation but has never fully delivered on market expectations. Now, under mounting pressure from structural changes including new technologies and stricter emissions standards, we could finally be on the brink of an M&A bonanza in the sector.
“There is certainly scope for a lot of co-operation throughout the industry, either through a full merger such as Renault-FCA or just sharing R&D or sourcing,” said Anna-Marie Baisden, Head of Autos, Macro Research at Fitch Solutions.
And Arndt Ellinghorst, the head of global automotive research at investment banking firm Evercore ISI, told CNBC he “wouldn't rule anything out at this stage as we know from public statements that various players are open to consolidation.”
Daimler and BMW recently struck an agreement to pool their mobility services to create a new global player providing sustainable urban mobility for customers. They have also joined forces on autonomous driving. If they are forced to compete with another mega automaker in FCA-Renault, Daimler and BMW could perhaps even explore deepening their ties.
“The recent FCA-Renault announcement confirms that the auto industry is changing and that cooperation will be one of the keys for future success. We are monitoring the next steps closely and certainly see the possibility that the merger can also create opportunities and potentials,” wrote a Daimler spokesperson in an email to CNBC.
VIDEO3:0703:07Cramer: Auto companies have too many employeesSquawk on the StreetAngus Tweedie, auto equity research analyst at Citi agrees that closer collaboration between Daimler and BMW would seem very logical given their similar target markets and therefore commonality of components. Areas of difficulty would be the shareholder structure and there also seems some opposition at both companies from an operational perspective. Like all European deals, headcount reductions would be difficult, Tweedie added.
Ford and Volkswagen have already forged a global alliance to develop commercial vans and medium-sized pickups together and have signed a memorandum of understanding to investigate collaboration on autonomous vehicles, mobility services and electric vehicles and have started to explore opportunities.
On the prospect of a bigger deal down the line for the two giants, Fitch's Baisden said there was appealing logic.
“Their strategies both focus on EVs and autonomy in the medium to long term and so with a challenging market that threatens their income, it would make sense.”
And don't forget about Peugeot. Multiple reports suggest the French carmaker was interested in doing a deal with Fiat Chrysler. If FCA consummates this deal with Renault, Peugeot will have to look elsewhere for merger opportunities.
Getty ImagesSome market participants suggest a tie-up between Peugeot and Jaguar Land Rover (JLR) could make sense.
“I can see how JLR would be an appealing partner in giving PSA exposure to the premium segment and also the US, which it is looking to return to,” said Baisden.
JLR has been struggling recently, posting losses in the first three quarters of 2017 before swinging to a small profit in the final quarter of the year. Further, PSA's chief Carlos Tavares has successfully turned around the Opel Vauxhall brand he bought from General Motors in 2017, demonstrating his ability to restructure and integrate new businesses.
Ellinghorst also wouldn't rule out Peugeot coming back for FCA: “They have shown interest in FCA before. (But) we must see how Renault and the French government reacts first.”
The European auto sector rallied on the back of FCA's proposal to merge with Renault earlier this week. Market watchers highlight that the positive share price moves show how undervalued carmakers are.
“There has been talk of consolidation for years. Now at the peak of the cycle, the market welcomes the fact that there is some action with regards to consolidation,” Ellinghorst told CNBC.
Peugeot and BMW did not respond to CNBC's request for comment.

HRE Wheels and GE Additive showcase next generation metal 3D printed on a 2019 Ford GT

HRE Wheels, a California-based wheel manufacturer, has added a new titanium 3D printed wheel to its HRE3D series. The second generation wheel, installed on a 2019 Ford GT, was designed and 3D printed with the help of metal 3D printing specialist GE Additive. HRE President and CEO Alan Peltier, said, “We’re proud to be breaking… Continue reading HRE Wheels and GE Additive showcase next generation metal 3D printed on a 2019 Ford GT

Take a look at the most expensive SUV in the world: the $1.9 million Karlmann King

The Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCIf you're looking to spend $1.9 million on a new vehicle, an Italian armored car based on a Ford F-550 chassis is probably not on your radar. Karlmann is trying to change that.
Reclining alligator skin back seats on the Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCThe company operates from Los Angeles, has a factory in Italy and is largely financed by Beijing-based International Automotive Technologies. Its first product, the Karlmann King, is a massive rolling lounge complete with recliners, a coffee maker, champagne flutes, a massive TV and a price tag that makes it the world's most expensive SUV.
The exterior door hatch on the Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCKarlmann King to debut at the New York Auto Show.Source: Karlmann KingOn top of the stratospheric starting price, buyers can customize the King to their liking. Alligator-skin seats, real gold trim and specialty upholstery are all available for a price. Michael Nothdurft, Karlman's sales director, says a client in Africa ordered a Karlman King with a $3.5 million price tag.
View of the interior dash on the Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCOne big part of that additional cost: bulletproofing. Most King buyers opt for the bullet-resistant option, which adds at least $300,000 to the price depending on the level of protection clients want.
Enjoy coffee and champagne while riding in the Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCThe buyers of these bulletproof monster trucks range from clients in dangerous parts of the Middle East and Africa to real estate moguls and high-dollar watch traders in the United States. But for less security-conscious shoppers, Nothdurft stresses that the King is supposed to be a rolling work of art.
Reclining in the Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCIt's undeniably different than anything else you'll see on U.S. roads. It has extremely angular styling and is absolutely massive.
“This car is the most emotional car that you can see at auto shows,” Nothdurft told CNBC. “People either hate it or they love it.”
The backseat control panel on the Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCThe King is based on a Ford F-550 chassis. The F-550 a massive truck frame that Nothdurft says was chosen for its proven durability and ability to handle the weight of an armored luxury vehicle. The King maintains the 6.8-liter V-10, suspension components and transmission of the F-550 and is therefore limited to 87 mph. The interior, however, is bespoke.
The Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBCKarlman is looking to get a U.S. manufacturing line built in the next few months, but for now, the King is hand-built in Italy. For U.S. market cars, armoring takes place in the States.
The company currently has 20 buyers lined up in North America, Nothdurft said.
Buyers who order a King today should expect delivery in nine to 15 months.
The Karlmann King at the 2019 New York Auto Show.Adam Jeffery | CNBC

Ford recycles 1.2 billion plastic bottles a year for auto parts

An employee walks past a Ford logo in the yet-to-be-completed engine production line at a Ford factory on January 13, 2015 in Dagenham, England.Carl Court | Getty Images News | Getty Images Ford is trying to reduce its carbon footprint by recycling plastic bottles and using them to make vehicle parts.
The automaker uses an average of 300 recycled bottles per vehicle, roughly 1.2 billion plastic bottles per year, to make the underbody shields for all of their cars and SUVs as well as the wheel liners on F-Series trucks.
Ford said recycled plastic is ideal for automotive parts because of it's light weight, which gives the added benefit of improving the aerodynamics of vehicles. Better aerodynamics also promote fuel efficiency and have allowed for a quieter environment on the 2020 Ford Escape, according to Ford.
“The underbody shield is a large part, and for a part that big, if we use solid plastic it would likely weigh three times as much,” Thomas Sweder, a design engineer at Ford Motors, said in a statement.
The bottles are shredded into small pieces and sold to suppliers that turn them into fiber used to make sheets of plastic. Ford then uses these sheets to make the underbody cover for its vehicles.
Ford has used recycled plastic as far back as the 1990s. According to environmental advocacy group Earth Day Network, an estimated 9.1 billion tons of plastic has been manufactured since it's creation in the 1950s, and 91% of the world's plastic waste has not been recycled. Since it's not biodegradable, nearly all of that plastic is still in the world.
“We do it because it makes sense technically and economically as much as it makes sense for the environment,” Sweder said. “This material is very well suited for the parts we're making with it, and is extremely functional.”
Earlier this year, Ford announced that a number of its manufacturing plants will soon be powered by 100% locally sourced renewable wind energy.

Asian automaker shares hit as Trump threatens Mexico with tariffs

General Motors Co is the biggest car producer and exporter in Mexico, and its global peers Ford Motor Co, Volkswagen AG and Fiat Chrysler Automobiles NV also have manufacturing presence there. TOKYO: Shares in Asia’s major automakers and their suppliers sank on Friday after U.S. President Donald Trump threatened to slap tariffs on Mexican imports… Continue reading Asian automaker shares hit as Trump threatens Mexico with tariffs

FCA, Renault face tall odds delivering on cost-cutting promises in merger

FRANKFURT/DETROIT (Reuters) – Fiat Chrysler Automobiles NV and Renault SA promise huge savings from a mega-merger, but such combinations face tall odds because of the industry’s long product cycles and problems translating deal blueprints into real world success, industry veterans told Reuters. FILE PHOTO: A Fiat Chrysler Automobiles (FCA) sign is seen at the U.S.… Continue reading FCA, Renault face tall odds delivering on cost-cutting promises in merger

Outside of Tesla, future EV sales in U.S. may be thin for most brands-study

(Reuters) – U.S. demand for electric vehicles, including hybrids, could rise to 1.28 million by 2026, a new study projected on Wednesday, but most brands will struggle to make money on the new models. FILE PHOTO: The 2020 Mercedes-Benz GLC EQC is revealed at the 2019 New York International Auto Show in New York City,… Continue reading Outside of Tesla, future EV sales in U.S. may be thin for most brands-study

Chinese Startup Neolix Mass Producing Driverless Delivery Vans – pymnts.com

Neolix, a Chinese startup, has begun mass producing small driverless delivery vans, with customers like JD.Com and Huawei already signed on as clients, according to a report by Bloomberg. The company’s vehicles look like tiny vans, and it expects the delivery of about a thousand of them inside of the first year. The company’s timing… Continue reading Chinese Startup Neolix Mass Producing Driverless Delivery Vans – pymnts.com

SF will allow additional dockless bike-share operators

Uber’s JUMP will soon no longer be the sole operator of stationless bike-share programs in San Francisco. Today, the San Francisco Municipal Transportation Agency announced the expansion of its stationless bike-share program to allow additional companies to operate in the city. JUMP received an exclusive, 18-month permit to operate a stationless electric bike-share service in… Continue reading SF will allow additional dockless bike-share operators