Mercedes-Benz Vans: Transformation into a sustainable future

10.

March 2020

Stuttgart

Sales record in 2019 with 438,400 vans sold worldwide Transformation initiative intensified with three pillars: Performance, Strategy and Transformation Systematic electrification of the product portfolio Marcus Breitschwerdt, Head of Mercedes-Benz Vans: “2019 was a challenging year for us in which we made groundbreaking decisions in order to put the van back on a successful track.” Stuttgart – In 2019 Mercedes-Benz Vans achieved a new best in the Group sales in a difficult environment, having sold a total of 438,400 vans (+4%). Revenues also developed positively to 14.8 bill. Euros, whilst the EBIT was significantly negative due to numerous one-time effects (-3.1 bill. Euros). Adjusted to take account of the one-off effects, Mercedes-Benz Vans achieved a positive operative result totalling 284 mill. Euros. Back in 2019, the business unit's management made groundbreaking decisions for the sustainably successful future of Mercedes-Benz Vans.
“2019 was a challenging year for us. So I'm all the more delighted that we were able to increase sales for the seventh year in succession with our impressive products,” said Marcus Breitschwerdt, Head of Mercedes-Benz Vans. “In the past year not only did we successfully position the new V-Class on the market and present the EQV* as our first electrically driven MPV; we also celebrated start of production of the eSprinter and further extended our range of connectivity services.” Breitschwerdt continued: “Furthermore, we have made groundbreaking decisions in order to put the van back on a successful track. This includes revising our product portfolio as well as setting up what we call a Transformation Office, which will be actively driving forward the change.”
*(combined power consumption: 26.4-26.3 kWh/100 km; combined CO2 emissions: 0 g/km)[1]
Own unit for transformation at Mercedes-Benz Vans
With Boost, the efficiency and transformation initiative, which Mercedes-Benz Vans embarked upon at the beginning of 2019, important leverage was established. In order to anchor the initiative even more emphatically for Mercedes-Benz Vans, the Boost Transformation Office (BTO), an organisation dedicated to the three pillars Performance, Strategy and Transformation, was set up at the start of February 2020.
With Boost Performance the main emphasis is on cost optimisation. Boost Strategy focuses on the realignment of Mercedes-Benz Vans as part of the product, sustainability and business unit strategy. Boost Transformation is continuing the cultural change.
Strong product portfolio
Today saw the public unveiling of the revised Mercedes-Benz Vito and eVito Tourer models (combined electrical consumption: 26.2 kWh/100 km; combined CO2 emissions: 0 g/km)1. The Vito is purchased predominantly for commercial use in the mid-size segment. The facelifted Vito impresses with features such as a new engine (OM 654) for all variants with front-wheel drive, the AIRMATIC suspension for higher ride comfort, more safety thanks to DISTRONIC and Active Brake Assist as well as a digital inside rearview mirror. The eVito Tourer boasts the same qualities, and has up to nine seats, making it ideal for passenger transportation, with its electric drive achieving an output of 150 kW and a range of 421 kilometres[2], [3].
Since the current model was launched in September 2014 the Vito has been sold more than 508,000 times worldwide. The models in the mid-size segment are now available in more than 100 countries around the world. They are built in Vitoria, Spain, and “made in China for China” at The Chinese Daimler Joint Venture Fujian Benz Automotive Co. Ltd. (FBAC) in Fuzhou. In Charleston, South Carolina, the Vito is built for the US market under the name Metris.
The Citan urban delivery van has been serving the small-van segment since 2012. Mercedes-Benz Vans will systematically continue its commitment to this segment together with the Renault-Nissan-Mitsubishi cooperation network and in this context it has decided to produce a successor to the Citan. The successor model will also be offered as a battery-electric variant.
Mercedes-Benz Vans continues to drive electrification of the product portfolio
With eDrive@VANs, Mercedes-Benz Vans is systematically driving forward the electrification of its product portfolio with locally emission-free electric drives, contributing to sustainable mobility in delivery and passenger transport. The first of these vehicles was the eVito Panel Van, closely followed by the eVito Tourer. The end of 2019 saw the start of production of the eSprinter in Düsseldorf. Also in 2019 Mercedes-Benz Vans presented the EQV (combined power consumption: 26.4-26.3 kWh/100 km; combined CO2 emissions: 0 g/km)1, its first purely battery-electric premium MPV. The vehicle offers a range of up to 417-418 km2, 3 with unrestricted use of its interior. Mercedes-Benz Vans has also announced an electric variant of the Citan, reaffirming its aim to electrify all model series.
Our goal is a holistic electric solution that not only reduces the strain on cities and the environment, but also offers our customers genuine benefits. Electric mobility is considered way beyond the vehicle itself here: Mercedes-Benz Vans offers a holistic ecosystem which is developed in close cooperation with customers for an outcome precision-tailored to their sector.
“The electric drive will gain more prevalence in the coming years as it becomes a strong mainstay of our product portfolio”, Breitschwerdt emphasises.
“With the eVito and the eSprinter, we consistently electrify our commercial vans,” Breitschwerdt continues. “The eVito has been on the market since 2018 and is in high demand. Thanks to our flexible production strategy, which allows us to produce both conventional and battery-electric vans on one production line, we can respond very well to the changing demand for eVito and eSprinter. And I am particularly pleased about the already high capacity utilisation for 2020. We are confident that the revised eVito Tourer will be able to inspire other customers – in the field of passenger transport, for instance. ”
The new Mercedes-Benz eVito Tourer takes on the autonomous look of its brothers with a combustion engine. But beneath the dynamic front with a charging connection in the bumper at the front left is the electric drivetrain (eATS), which powers the front wheels with a peak output of 150 kW. The electric motor, the transmission with fixed transmission ratios, the cooling system and the power electronics form a compact unit. The energy is stored in a lithium-ion battery in the vehicle's underbody. It is configured low down and centrally, which has a positive effect on the eVito Tourer's handling. The top speeds of 140 km/h with standard and 160 km/h with special equipment ensure rapid progress out of urban traffic, too. The
Mercedes-Benz eVito Tourer comes as standard with a water-cooled on-board charger with alternating current with an output of 11 kW. This means that it is also prepared for AC (alternating current) charging at home or public charging stations. Things can be sped up using the Combined Charging System (CCS) with direct current (DC) or alternating current (AC). In Europe the eVito Tourer thus charges at one of these stations with a maximum output of up to 110 kW in optional guise, the standard output being up to 50 kW. The charging time of 10 – 80 percent SoC (State of Charge) is thus around 45 minutes at 110 kW. The battery with a usable capacity of 90 kWh facilitates a range of 421 kilometres1, 2.
[1] Electrical consumption has been determined on the basis of Directive 692/2008/EC. Electrical consumption is dependent on the vehicle configuration.
[2] Electrical consumption and range have been determined on the basis of Directive 692/2008/EC. Electrical consumption and range are dependent on the vehicle configuration.
[3] The actual range is furthermore dependent upon the individual driving style, the road and traffic conditions, outside temperature, use of climate control/heating system, etc. and may differ.

Press Contact

Silke Walters

Manager Global Business Communications Mercedes-Benz Vans

silke.walters@daimler.com

Tel: +49 176 30909308

Benjamin Oberkersch

Spokesperson Van Technology Communications – eDrive@Vans

benjamin.oberkersch@daimler.com

Thomas C. Rosenthal

Global Technology Communications Mercedes-Benz Vans – Future Transportation & adVANce

thomas_christian.rosenthal@daimler.com

Tel: +49 176 30933075

Press Contact Overview

Media

Download

Pictures (1)

Documents (1)

Media Contact (3)

Filter

Show thumbnails
Show list
Slideshow

Settings

Preview

Do you really want to delete the data record?

Please wait a moment …

Please wait a moment …

Please wait a moment …

Please wait a moment …

20C0161_02

Legend
:

Digital Premiere Vito and eVito Tourer (combined power consumption: 26.2 kWh/100 km; combined CO2 emissions: 0 g/km)*, in the picture: Marcus Breitschwerdt, Head of Mercedes-Benz Vans

Release date
:

Mar 10, 2020

Loading

Exclusive: Nissan to pull out of venture fund with Renault in cost-cutting drive, sources say

TOKYO (Reuters) – Nissan Motor Co (7201.T) is likely to pull out from a venture capital fund it runs with alliance partners Renault SA (RENA.PA) and Mitsubishi Motors, as part of the Japanese automaker’s drive to cut costs and conserve cash, two sources said. FILE PHOTO: The logos of car manufacturers Renault and Nissan are… Continue reading Exclusive: Nissan to pull out of venture fund with Renault in cost-cutting drive, sources say

Cars2 Huddersfield opens new refurbished Nissan dealership

Cars2 Huddersfield has opened a new Nissan dealership. The refurbishment of the Huddersfield site took just six weeks to be completed and for the first customers to be welcomed on site. The Nissan dealership on Leeds Road, Bradley, Huddersfield, is a first for dealer group Cars2, which already has showrooms in Barnsley, Bradford and Wakefield.… Continue reading Cars2 Huddersfield opens new refurbished Nissan dealership

Nidec conducts mass demotions to clear way for Nissan’s Seki

TOKYO — Japanese electric motor manufacturer Nidec has downgraded the positions of a slate of top-level executives in order to concentrate power in the hands of Jun Seki, the incoming president, the company said Friday. Seki, who briefly served as the third-ranking executive at Nissan Motor before jumping ship to Nidec, will answer only to Chairman and CEO Shigenobu Nagamori.… Continue reading Nidec conducts mass demotions to clear way for Nissan’s Seki

Hyundai kicks off production of new Creta at Chennai plant

The first made-in-India production-ready new Creta has rolled off the production line at Hyundai Motor India’s Sriperumbudur plant in Tamil Nadu, ahead of the midsize SUV’s official launch on March 17, 2020. Hyundai Motor India had upgraded the plant in preparation for the second-generation Creta’s production. Additions include a set of robots to assemble the roof… Continue reading Hyundai kicks off production of new Creta at Chennai plant

Honda’s China sales drop 85% in February amid coronavirus crisis

GUANGZHOU — Japanese automaker Honda announced on Friday its car sales in China fell 85.1% in February, marking its largest ever single-month decline as the coronavirus epidemic hit business hard. Many of Honda’s sales outlets in China were forced to close in early February due to the rapid spread of the coronavirus. As consumers have refrained… Continue reading Honda’s China sales drop 85% in February amid coronavirus crisis

Nissan presses ahead with £400m Qashqai plan for Sunderland

Nissan Japanese carmaker unveils £52m production press amid post-Brexit tariff warnings The production line at Nissan’s Sunderland factory. The third-generation Qashqai model is due to be delivered in 2021. Photograph: Owen Humphreys/PA Media Nissan is pushing ahead with its £400m plan to build its new Qashqai sports utility vehicle at its Sunderland factory, despite the… Continue reading Nissan presses ahead with £400m Qashqai plan for Sunderland

Nissan gives Sunderland plant £400m boost to build new Qashqai

Nissan has announced the latest stage of a £1 billion investment programme in its Sunderland production facility in preparation for building the next-generation Qashqai there.  This is a £52 million press to stamp panels for the third-generation crossover, which is expected to launch early next year. It brings the total investment in production of the new Qashqai to… Continue reading Nissan gives Sunderland plant £400m boost to build new Qashqai

@Nissan: Nissan unveils new stamping line in Sunderland ahead of new Qashqai launch

2020/03/06 New Extra-Large Press unveiled in UK plant Part of £400m investment in facilities in preparation for new Qashqai New Juke production hits 35,000 as model celebrates 10th anniversary SUNDERLAND, UK – Nissan today unveiled a new £52m XL press line in its UK manufacturing plant, as preparations ramp up for the hotly-anticipated next generation… Continue reading @Nissan: Nissan unveils new stamping line in Sunderland ahead of new Qashqai launch